Toll Free: 1.855.566.7753    Email: info@norsketools.com

Router Bits.

TAB_Straight_NA

Straight

  • Ideal for smooth, clean and general purpose routing, grooving or rabbeting
  • These bits give a smooth, planed finish with a medium feed rate
  • The workhorse of the routing world used for most applications requiring a flat, finished bottom
Item Cutting Diameter Cutting Length Shank UPC
TRTBP200 1/4″ 1″ 1/4″ 628204678001
TRTBP201 1/2″ 1″ 1/4″ 628204678018
TRTBP202 3/4″ 1″ 1/4″ 628204678025
TAB_Flush_Trim_NA

Flush Trim

  • Twin flute cutters with bearing guide on the bottom of the shaft provide a smooth and accurate flush trim
  • Primarily designed to flush trim overlaid surfaces such as laminates and veneers but can also be used for template work
  • Suitable for straight and particularly shaped patterns
  • Complete with fully enclosed ball bearing guide
Item  Cutting Diameter Cutting Length Shank UPC
TRTBP203 1/2″ 1/2″ 1/4″ 628204678032
TRTBP204 1/2″ 1-1/4″ 1/4″ 628204678049
TRTBP236 1/2″ 1-1/4″ 1/2″ 628204678360
TAB_Top_Bearing_Flush_NA

Top Bearing Flush Trim

  • Twin flute cutters with the bearing guide mounted on the top of the shaft make this bit ideal for template work where the work piece is being routed out or grooved
  • Suitable for straight and shaped patterns
Item  Cutting Diameter Cutting Length Shank UPC
TRTBP205 1/2″ 1″ 1/4″ 628204678056
TAB_Panel_Pilot_NA

Panel Pilot

  • For smoother, faster routing of panel cut-outs and veneers
  • The drill point design allows for self-starting and drilling through materials
  • The point plunges quickly, the carbide edge cuts quickly
Item  Cutting Diameter Cutting Length Shank UPC
TRTBP206 3/8″ 1″ 1/4″ 628204678063
TRTBP237 1/2″ 1-1/4″ 1/2″ 628204678377
TAB_Bevel_Trim_NA

Bevel Trim

  • These bits provide a bevel of 22° and are ideal for the smooth trimming of laminates
  • Complete with fully enclosed ball bearing guide
Item  Cutting Angle Cutting Length Shank UPC
TRTBP207 22 Degree 3/8″ 1/4″ 628204678070
TAB_Round_Over_NA

Corner Round

  • These 2-fluted bits are often used to soften the edges of furniture, for window sashes and general joining work
  • The shear angles provide the smoothest cut available
  • Complete with fully enclosed ball bearing guide
Item Cutting Radius Cutting Length Shank UPC
TRTBP208 1/4″ 7/16″ 1/4″ 628204678087
TRTBP209 3/8″ 5/8″ 1/4″ 628204678094
TRTBP210 1/2″ 3/4″ 1/4″ 628204678100
TAB_Chamfer_NA

Chamfer

  • This bit is perfect for edges, mantels, frames, cutting boards and more
  • Makes perfect 45° beveled edges for miters
  • Complete with fully enclosed ball bearing guide
Item Cutting Angle Cutting Length Shank UPC
TRTBP211 45 Degree 5/8″ 1/4″ 628204678117
TAB_Slot_Cutter_NA

Slot Cutter

  • These bits are designed to give you super smooth cuts on all 3 cutting surfaces
  • Ideal for picture frames, lap joints, cabinet doors and windowpanes and the installation of T-edging
  • Complete with fully enclosed ball bearing guide
Item  Cutting Diameter Cutting Length Shank UPC
TRTBP212 1/4″ 1/4″ 1/4″ 628204678124

PROUD MEMBER OF:

Back to Top
Enter your Infotext or Widgets here...